Clik here to view.
Re: Beginner setup
Thanks guys I thought it would be fairly easy Another question though - I have set up my pfsense with the 2 NICs, and it has the IP of 192.168.1.120 on my "home"-network, but i cant reach the web-GUI...
View ArticleRe: Hierarchy of native clones of file name.vmdk is too deep
Solved: This turned out to be an array level issue related to VAAI. We are running R31 code on our VNX storage array and 'VAAI nested clone support' didn't come into play until R32/INYO for VNX. I...
View ArticleClik here to view.
Re: STAX Error when executing VMMark2-STAX.bat - STAX Service Not Registered
Hey - thanks so much for getting back to me Ok, so I noticed the staf.cfg file was actually named staf.cfg.txt (I know the doc says to watch out for this, but I missed it when I re-installed the staff...
View ArticleRe: Hierarchy of native clones of file name.vmdk is too deep
Good to know .... If I had a way of reasonably summarizing this, I'd like to write an article about it .... I just need to know what the heck to write (I'm not a storage guy).
View ArticleRe: STAX Error when executing VMMark2-STAX.bat - STAX Service Not Registered
Can you open a command prompt on your prime client and execute the following "java -Xms512m -Xmx1024m -jar C:\STAF\services\stax\STAXMon.jar"
View ArticleRe: Beginner setup
Can you confirm you connected the virtual NICs to the correct port groups, i.e. did not mix them up?Are you able to ping the pfSense IP address from the client?Are you able to ping any IP address in...
View ArticleGuest/Host Copy/Paste unreliable if full screen guest is minimized
I have multiples VMs running full screen on primary monitor. Inside a guest I copy a file to the clipboard. I then minimize the whole VM window from the top flydown bar. I then browse to a host...
View ArticleRe: Hierarchy of native clones of file name.vmdk is too deep
Yea, the more I think about it, it makes sense though...If you look at the error and if the array doesn't support 'nested clones' with VAAI, anything beyond the first link of the chain is "too deep",...
View ArticleRe: Issues After Upgrade
We had that issue and it was related to SSO. You can setup the username for the vcenter server as domain\user or setup SSO domain lookup order...
View ArticleRe: Beginner setup
I can ping my client from the pfsense, but not the other way around. 192.168.1.120 -> 192.168.1.75 OK192.168.1.75 -> 192.168.1.200 No answer
View ArticleRe: Running batch file on guest VM using vCD?
You have a couple options for this:1) Preferred: Setup your batch file in the Guest Customization of your vApp when you are ready to deploy, I provided an example of this in the Custom Deploy vApp...
View ArticleRe: Hierarchy of native clones of file name.vmdk is too deep
the nativeFormat message sounds like it was created with VAAI enabled, but then VAAI was disabled. so you have a native linked clone you are trying to work with, when in non-native mode.
View ArticleRe: Problems trying to receive a HostImageProfileSummary
Cathy,The vSphere Web Service SDK is the standard way to access the vCenter API, see the sample vsphereviews/vsphere-wssdk-provider
View ArticleClik here to view.
Re: Trying to Login into vCD 5.1 through SSO
Now its a different issue. Sometimes login works but most of the time login fails . Seeing similar behavior as below thread.vCloud API multiple concurrent sso Federation Login session When login fails,...
View ArticleRe: Error 29126. Second install in multisite SSO install
Great. Good stuff! please mark correct answers
View ArticleRe: Beginner setup
Is the 192 network the "LAN" or "WAN" network on pfSense? In case it's the WAN network you'll have to setup a firewall rule to allow access. André
View ArticleVMW Horiz View Client cannot connect (Status Code 400)
Hi Team... I'm stuck getting off the ground with VMW View. I've got my first linked clone pool ready to go (no errors).Its provisioned and users are entitled. I try to reach out using the VMware View...
View ArticleRe: Target VM shuts down after successful P2V
Thanks vargas1!!! the UPS thing was my problem. You saved my visualization conversion!
View ArticleRe: Beginner setup
It's the WAN-network.I have configured the LAN-network as 172.16.0.0/16. Okay, would you know how to make this rule? I'm guessing it would be something like:Allow all from 192.168.1.0/24orAllow all...
View ArticleClik here to view.
Re: Beginner setup
Okay, i think i have found something that might help..http://doc.pfsense.org/index.php/Remote_firewall_Administration I'm setting up a Ubuntu Desktop on the 172.16.0.0 side of the firewall and will...
View Article