Re: How to connect machines to network with only 1 mac?
Hi, As you know, virtual switches are working same as physical switches on layer 2, ports communications are based on MAC. So it's impossible.You can install a server such as Windows server 2008 and...
View ArticleRe: How to present a LUN to a VM?
sweet - why was that so hard to find in the docs? Gees ... Anyway, I notice that the option is greyed out for me. A couple follow-up questions: 1)These are DL380 G6 servers with EVA -supported FC...
View ArticleRe: How to present a LUN to a VM?
I checked it on our BL460c G6 but I have a DL380 G6.Let me to check it on the server.
View ArticleRe: How to connect machines to network with only 1 mac?
So there is really no possibility to get an esxi running when my privder has port security enabled which is allowing only 1 mac from the host?
View ArticleRe: VMware-viclient 5.1.0 doesn't work on Windows 8 x64 !!!! (The type...
No problem here using the same combination.Do you have the .NET Framework 3.5 installed (via "Add Windows Features ...") ? - Andreas
View ArticleRe: VMware View Design
In theory yes with expensive F5 loadbalancers and a complex setup, but it would be overly complicated and I would not go down that route. // Linjo
View ArticleRe: Host nicht verbunden
Ohne dass die VMs heruntergefahren worden? Unter 5.0? Eher nicht. Selbst wenn ein Shutdown erfolgreich war, kann es sein, dass der Host die vmdk immer noch lockt, das einzige was zuverlässig hilft ist...
View ArticleRe: How to connect machines to network with only 1 mac?
Welcome to the Community - If you are providing your Internet Provider with the physical MAC address that is the problem - what you will need to do is provide the provider the MAC address of VM running...
View ArticleVMware Installer error - VMCI service failsH
Host: Ubuntu 13.10 kernel 3.9.0-6-genericAttempted guest: Windows 8 NThe program (VMware e.x.p) installed without errors according to the installer (this needs to be fixed since in fact the...
View ArticleRe: vSphere losing connection to VMs
Welcome to the COmmunity - I am thinking the issue is the 4 GB of RAM - this is a light amount for an ESXi host -
View ArticleRe: Unable to access file
Hi Mohammed, Thanks for getting back to me. Yes the datastore is mapped to all ESXi blades.
View ArticleRe: basic question for Fusion
Welcome to the Community - Yes you will be able to access those files from a Windows running under Fusion -
View ArticleRe: basic question for Fusion
have a look into the following article which should throw some insight on how to share folders of your Mac with Windows Sharing folders of Mac
View ArticleAccess internal network from ESXi host?
Hi, is it possible to access the internal virtual network from the ESXi host? 'In XenServer I used to add a secondary IP address to the host's NIC so I could use a Samba file server VM as a "CIFS ISO...
View ArticleRe: Resetting HardwareStatus via PowerCLI
You would probably want to write that more along the lines of the below: $user = "root"$password = "Password"$vmhosts = Get-VMHost | Select NameForeach ($vmhost in $vmhosts){ Write-Host "Processing...
View ArticleRe: vSphere losing connection to VMs
And you think it would cause it to drop network, and not just freeze up? If that is the case, it's worth a shot, as I am upgrading any who, but I wasn't even thinking it could be that.
View ArticleRe: My VMWare Fusion Will NOT Load - PLEASE HELP!!!!
Please ensure that the Windows which you have moved to external drive has all the data and apps and nothing is missing.Proceed only if you have confirmed it. I suggest you delete the bundle present in...
View ArticleRe: Manually remove vSphere Client (ESXi 5.1) from a crashed vSphere Server 5...
Hi, Before I tried it, I did a recovery of the OS from a point at which vCentre had been removed. Re-installed vCentre and then added the hosts back into it. There were a couple of warnings with the...
View Article