You can define the datastore which are considered/used by HA for datastore heartbeating. Make sure that the datastores which you want to unmount/detach are not in the list. The folder may remain on the datastore after reconfiguring HA datatore heartbeating, but it won't be in use anymore.
André
Yeah, the workflow our design team has gone with is not the preferred Imprivata way. We expected some hiccups because of this, and, well, it looks like this is one. Our VDI are delivered through View, and we have a mix of apps delivered via XenApp or App Volumes. It's kind of a melting pot right now.
If I can't get the team to agree on a lock delay, I may be stuck with my logon tasks. We'll see how far I get. Those other products you mentioned, I might be able to look at them at some point, but, we have a go live in about 2 weeks, so, I won't be able to look into anything new for the time being.
Has there been decision already placed until when VCDX5 designs could be submitted ? Is there something like VCDX6-only-from-this-moment-on date set up ?
Associated question, if I may : we are group of people targeting March 2017 submission, each of us individually with different project. What happens if our submissions fail to be invited for defense in May - would we have to re-submit VCDX6 design in June or can we brush up the same design and re-submit in June ?
Thanks for reply !
I had the same issue, searched web up and down. no luck.
Can vmware address this issue with a sense of urgency?
what is the root cause? tons of people face the same issue.
please escalate the priority.
Thanks for the info. This was helpful in getting me past that error message when installing the Synology VAAI vib so I can finally do thick provisioning.
Based on how deep the tree is, you may be better off either cloning out to another datastore or deleting your VM and restoring from VEEAM assuming your backups are good. Either way should give you a consolidated disk tree. VEEAM tends to leave a message hierarchy from time to time that requires attention close to when it's happening so it doesn't get out of control.
Hi
many thanks for the prompt response
I followed your instruction and no when I attempt to start the virtual hard drive I get the error
Error while powering on: The file specified is not a virtual disk.
It also seems that no log file is created and the exisitng file is not showing a modification.
Any ideas
thanks
Ian
Hello,
i have a vcenter server 5.5 with 3 host on 5.5 U1
Today, the 2 services virtual center and manager does'nt started.
i look my free space disk and i've debug_log grow without end... i stop the service vcenter syslog, i delete this file and i restart the service.
So, when i've restart virtual center and manager service, "f......, you dream man"
i have this issue :
The description of the event ID 1000 in the VMware VirtualCenter Server source is not found. The component that triggered this event is not installed on the local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event is from another computer, the display information must be registered with the event.
The following information was included with the event:
Failed to intialize VMware VirtualCenter. Shutting down ...
The message resource is present but the message is not in the string table or messages
i've a french system, i used google translate
Thanks for your help
Have a good day
Hi there, i'm reading these days lot of docs about Hyperconverged Infrastructure.
One key point is the Agnostic Hypervisor feature of VSAN.
I've read that VSAN from version 6.2 can map itself via NFS or iSCSI, but obviously, mapping the datastore via network with this protocols, will transform my infrastructure in a NON-Hyperconverged infrastructure,
because data will no more be access locally, but through the netowkr. In the same time i'll make mi infrastrucutre more and more complex introducing differente managment interface (one for VSAN and one for the other Hypervisor).
I've read that real agnostic Hypervisor are produt like Nutanix and HPE hyperconverged infrastrcutre.
Some one ha some other info info about that for Vmware VSAN?
Best regards.
Hi Martin,
it works. Thanks a lot for your support.
Regards
Tomas
Same problem with Workstation 12, Windows 10 on a Linux host. And this is still not fixed? VMWare = Greatest bullshit ever seen. :/ !
hp bios time is wrong ( checking with ilo ) but when i check esxi host time zone with vsphere clinet so esxi time is true. can it a problem for vm etc...
on vcenter server selected power management balanced policy . i want to change it to high performance. There is something I can not understand. If i change the policy . Do I also change from the server's bios screen . Is it just enough to change it on vcenter.
Please attach "Windows XP Home Edition.vmdk" as well as "Windows XP Home Edition_000.vmdk" to a reply post. Maybe there's something wrong with the metadata.
André
If you have the option to change the power management through vCenter / host settings, then this means that the BIOS on that host has been configured to allow the guest operating system (ESXi) to manage the power sertings of the physical machine. This is the recommended configuration from VMware.
You can change the policy from within vCenter and there is nothing further you need to do in the BIOS, as the BIOS has already been configured to allow ESXi to manage this configuration.
Cheers, Matt.
You will want to set the correct time in the BIOS as well, even when you have an NTP server defined within the ESXi configuration. I'm not sure if it's an issue still, but there used to be cases of odd time skew when the BIOS date and time wasn't configured correctly. See point 2 at the top of the article below:
Verifying time synchronization across an ESX/ESXi host environment (1003736) | VMware KB
Cheers, Matt.
HI
thanks for all the help, I've attached the files as you asked.
I notice that the files are quite small and futher down the listing is a vmdk file which is 3,823,234kb
I assume the virtual drive is split into sections designated with the extensions -s001?
If it has all gone south is there anyway to open the vmdk file and extract the two folders I need?
cheers
Ian
Quick question. What is the version of Office in the master image?
As far as i know, there is no list available for public at the moment and I'm not aware of any third party tools for assessing the applications for AppStacks.
In general, do not package applications that have kernel mode drivers or antivirus or VPN and applications that run after user logs out.
As always, you may post on this community if there are any issues with any applications.
Hi Lakshman,
Thank you for the response. The Office version is 2010 Sp2 PP and Visio is also 2010.
